從材質到製造皆為100%台灣製作的三層醫療拋棄式口罩，擁有CNS標章，經過政府核可合格的雙鋼印醫療口罩工廠出貨。使用特別的包邊技術，達到真正滿版，周邊均無其他顏色包邊，完美展現整體設計。

• 成分：
  外層 / 防潑水柔軟水針布：100%聚酯纖維
  中層 / 熔噴(Melt Blown)不織布：聚丙烯
  內層 / 親膚性不織布：聚丙烯
• 規格：
  平放面積 / 17.5*9.5 (cm)
• 產地：台灣。查看口罩相關認證文件。
• 交期：3工作天出貨。

－About the product－

100% made by hand in Taiwan. We use the double-stamped medical masks factory approved by the government, and they have the CNS mark. Use special edging technology to achieve true full version, without other color edging around, perfectly show the overall design.

• Content:
  Outer layer / water repellent soft water card cloth: polyester fiber
  Middle layer / Melt Blown non-woven fabric: polypropylene
  Inner layer / skin-friendly non-woven fabric: polypropylene
• Specification:
  Flat area / 17.5*9.5 (cm)
• Origin: Taiwan. Check the certification.

－使用方法－

• (1) 雙手洗淨，取出口罩。(2) 確認方向，覆蓋口鼻，並將鬆緊帶掛於雙耳上。(3) 拉開口罩重疊折線，確保臉頰緊密貼合。 (4) 用手指輕壓鼻樑片，以確保緊密。
• 訂購數量八個以下為氣泡紙包裝，外包裝盒可能會受到擠壓或受損，但不影響內容物完整性。八個(含)以上方使用紙箱出貨。
• 瑕疵定義：請參照服務條款。

－How to use－

• (1) Wash hands. (2) Confirm the direction, cover the nose and mouth, and hang the elastic band on both ears. (3) Pull the open cover to overlap the fold lines to ensure that the cheeks fit tightly. (4) Gently press the nose bridge with your fingers to ensure tightness.
• If the order quantity is less than eight, it is packaged in bubble paper. The outer box may be squeezed or damaged, but the integrity of the contents will not be affected. Eight (inclusive) and above are shipped in cartons.
• DEFINITION OF DEFECTS: Refer to the Terms of Service.